home *** CD-ROM | disk | FTP | other *** search
/ ShareWare OnLine 2 / ShareWare OnLine Volume 2 (CMS Software)(1993).iso / infor / stacdos6.zip / 2304.TXT
Text File  |  1993-04-23  |  5KB  |  86 lines

  1. ___________________________________________________________________________
  2. STACKER NOTE                                                   STACKER NOTE
  3. Title: Stacker and MS-DOS DOS 6.0 (Applies to Stacker 2.x and 3.0)
  4. STAC FAX Index #2304 - 04/02/93                         
  5. ___________________________________________________________________________    
  6.  
  7. Background.
  8.  
  9.    The information provided in this Stacker Note addresses issues related
  10.    to compatibility between Stacker and MS-DOS 6.0. Stacker 2.x and 3.0 are   
  11.    completely compatible with MS-DOS versions 3.2 and above, including MS-DOS 
  12.    6.0. The MS-DOS setup program will detect Stacker's presence and install 
  13.    files to the appropriate drives. This eliminates the need for DOS 
  14.    installation batch files such as STACDOS5.BAT to perform a DOS upgrade.
  15.  
  16.    Microsoft includes a data compression product with MS-DOS 6.0. It is not  
  17.    possible to run multiple data compression products simultaneously on a 
  18.    single computer. DO NOT attempt to Stack a DoubleSpace compressed drive 
  19.    with Stacker 2.x or 3.0. The result could cause data loss. The MS-DOS 6.0  
  20.    installation will not offer to use the DoubleSpace compression program on 
  21.    your Stacked drive.
  22.  
  23. Installing MS-DOS 6.0 on a Stacker Drive.
  24.  
  25.    The DOS 6.0 setup program is aware of data compression programs. To install  
  26.    MS-DOS 6.0 on a Stacker drive, use the normal DOS SETUP command. The setup  
  27.    program will detect your Stacker drive and following message will appear:
  28.    
  29.            "Your computer uses a disk compression program.
  30.             Setup can install MS-DOS on your computer.
  31.             However, you will not be able to un-install
  32.             MS-DOS during or after setup. For more information
  33.             see 'Diagnosing and Solving Problems'."
  34.  
  35.    Setup will recommend to continue with the installation process. Installing  
  36.    the utilities that are offered during the setup process will not impact 
  37.    your Stacked system. Setup will not offer to install DoubleSpace if it 
  38.    detects another compression program on your system.
  39.  
  40.    The DOS 6.0 system files will be properly transferred to the uncompressed  
  41.    portion of the boot drive during installation. Any DOS device drivers that 
  42.    are referenced in your CONFIG.SYS file will also be properly updated on 
  43.    the uncompressed drive by the DOS setup program. It will be necessary to 
  44.    manually update any DOS program that is located in the DOS directory on 
  45.    the uncompressed drive, but is not referenced in your CONFIG.SYS file. For 
  46.    example, to determine which drive is the uncompressed boot drive type 
  47.    STACKER and press ENTER. The output will look similar to the following:
  48.  
  49.    Stacker Disk Mount Utility - 3.00, (c) 1990-92 Stac Electronics,
  50.    Carlsbad, CA
  51.    Registered to: Stac Electronics
  52.      Stacker drive map:
  53.      Drive C: was drive D: at boot time  [ D:\STACVOL.DSK = 80.30MB ]
  54.  
  55.    Look for the drive that C was at boot time. In the example drive C was drive 
  56.    D at boot time, so drive D is the uncompressed boot drive. Now that you have 
  57.    identified the uncompressed boot drive, copy CHKDSK.EXE from the DOS 
  58.    directory on your compressed Stacker drive to the DOS directory on the 
  59.    uncompressed drive. Do the same with any other DOS file that did not get 
  60.    updated on the uncompressed boot drive. It is recommended that you keep a 
  61.    copy of COMMAND.COM in the DOS directory on the uncompressed drive. 
  62.    Stacker's boot file synchronizer may update COMMAND.COM automatically for 
  63.    you. If it does not, manually copy COMMAND.COM to the DOS directory on the
  64.    uncompressed  boot drive.
  65.  
  66.  
  67. Installing Stacker on an MS-DOS 6.0 System.
  68.  
  69.    Stacker versions 2.x and 3.0 will install fine on any system that is 
  70.    running MS-DOS 6.0. They are FULLY COMPATIBLE. However, it is important  
  71.    that you DO NOT install Stacker on a drive that has been compressed with 
  72.    the Microsoft DoubleSpace compression utility. Doing so could result in 
  73.    data loss. If you wish to use Stacker and you have already compressed your  
  74.    drives with DoubleSpace, follow the instructions in your MS-DOS 6.0 users 
  75.    guide for removing DoubleSpace before installing Stacker.
  76.  
  77.    As indicated in the Stacker Users Guide, disable any Anti Virus programs 
  78.    before running the Stacker setup program. This includes the Anti Virus 
  79.    program that is a part of MS-DOS 6.0.
  80.  
  81.  
  82.  
  83.  
  84. __________________________________________________________________________
  85. Copyright 1993, Stac Electronincs
  86.